How to build the easiest Zigbee chair occupancy sensor
This DIY Zigbee chair occupancy sensor for Home Assistant doesn’t require soldering, knowledge of electronics, or 3D-printing.
This DIY Zigbee chair occupancy sensor for Home Assistant doesn’t require soldering, knowledge of electronics, or 3D-printing.
The IKEA STYRBAR is a small and economical option for those using Zigbee.
This Blueprint allows you to quickly configure the four buttons of the latest Philips Hue Smart Dimmer Switch and Remote.
The Linkind 1-Key Remote Control is short and has to functions that can be assigned to an action.
You can slide, knock, flip, and rotate this battery-powered remote.
The Philips Hue Tap has four buttons which can be configured using this Home Assistant Blueprint.
A Blueprint to configure both single and long clicks on the Philips Hue Dimmer Switch.
As of ESPHome 2021.9.0, you can easily integrate the Airthings Wave Plus, a CO2, VOC, and Radon sensor, with Home Assistant.
Wi-Fi temperature and humidity sensors do not require a hub. They connect directly to an access point and configured using a built-in web server or an app.
Bluetooth Low Energy (BLE) has similar properties to Zigbee: It uses the same 2.4 GHz radio frequencies and consumes very little power.